Validating The Cluster Installation - Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Installation Manual

[Enter your Document Title]
Figure 12. Cluster IP Address
The Cluster Service Configuration Wizard shown in Figure 12
automatically associates the cluster IP address with one of the public or
mixed networks. It uses the subnet mask to select the correct network.
23. Click Finish to complete the cluster configuration on the first node.
The Cluster Service Setup Wizard completes the setup process for the
first Node By copying the files needed to complete the installation of
Cluster service. After the files are copied, the Cluster service registry
entries are created, the log files on the quorum resource are created, and
the Cluster service is started on the first node.
A dialog box appears stating that the Cluster service has started
successfully.
24. Click OK.
25. Close the Add/Remove Programs window.

Validating the Cluster Installation

Use the Cluster Administrator snap-in to validate the Cluster service installation
on the first node.
1. Click Start, click Programs, click Administrative Tools, and click
Cluster Administrator.
[Document Restriction Notice]
19