Creating Cluster File Share Resources With The Webui; Creating Cluster File Share Resources With Terminal Services - Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Installation Manual

[Enter your Document Title]
set to be possible owners.
Select NEXT on the dependencies window to continue. IP Address resources will
•
not have any dependencies.
Enter the IP Address and Subnet mask. Select the Network adapter for this
•
address. Select FINISH creating the resource.
• Select FILE->NEW->RESOURCE
• This will be a Network Name resource. Enter a name and description for the
resource for the resource. In the resource type window select NETWORK
NAME. In the group window select the name of the group previously created.
Select NEXT to continue.
Select the possible owners and select NEXT to continue. Usually both nodes are
•
set to be possible owners.
• Select the IP Address resource previously created and select ADD. Select NEXT
in the dependencies window to continue.
• Enter the NETWORK NAME and select FINISH creating the creating the
resource.

Creating Cluster File Share Resources with the WEBUI

Open the WEBUI and select the Cluster Management Link on the left hand side.
•
• Select the Resources link under Cluster Management.
Select NEW, select NEXT.
•
Specify the resource name, description, type and the cluster group where the
•
share will reside. The type will be File Share. Set the resource's group to the
name of the Virtual Server group that will host the share. Select NEXT.
Specify the possible nodes. (should be both nodes) Select NEXT.
•
Specify the dependencies. File shares should be dependent on the Virtual Disk
•
(SCE Pool Resource) that hosts them. Select NEXT.
Specify the parameters for the file share and select NEXT.
•
Verify the parameters and select FINISH to create the resource.
•

Creating Cluster File Share Resources with Terminal Services

In a cluster configuration file shares must be created in cluster administrator to be cluster
aware. To create a cluster aware file share resource:
Select FILE->NEW->RESOURCE
•
This will be a File Share resource, type a name for the resource. In the resource
•
type window select FILE SHARE. In the Group window select the name of the
group desired to create the share in. Make sure a group is selected that contains
a physical disk resource. Select NEXT to continue.
• Select the possible owners and select NEXT to continue. Usually both nodes are
set to be possible owners.
• Select the physical disk resource the share will reside on and select ADD. Select
NEXT in the dependencies window to continue.
Enter the share name and path. Configure the User Limit and permissions for the
•
share. Select FINISH creating the file share resource.
[Document Restriction Notice]
28