Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Installation Manual page 4

Installation guide for the e7000 v1 - technical white paper

Hide thumbs Also See for 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server:

Table of Contents

[Enter your Document Title]

You may refresh the device list manually by selecting the Refresh button.

9. Select the unconfigured StorageWorks NAS device from the device list. This

launches the WebUI configuration application (Rapid Startup) on the target

StorageWorks NAS device.

10. Follow the instructions on the screen to input the correct information. Verify

that your information is correct when the configuration review screen is

displayed.

11. Click the Online icon to save the network information to the NAS e7000.

12. Click the Finish icon to exit Rapid Startup. Close the browser window. The

NAS e7000 will now reboot to set the configuration information.

13. If the NAS e7000 is being deployed in a cluster configuration, go back to the

RapidLaunch utility program and select the next unconfigured NAS device to

be used within the cluster and repeat steps 8-12 for the second node.

14. Exit the RapidLaunch utility and remove the RapidLaunch CD from the CD-

ROM drive and store it in a secure location.

[Document Restriction Notice]

Table of Contents