Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Installation Manual page 25

[Enter your Document Title]
14. Repeat steps 1-13 on NODE A.
Confirm that the SWVR upgrade process was successful on both nodes:
Open services and confirm that the Virtual Replicator Registry Cleanup Tool
•
Service is installed and started.
• If this service is not installed, the patches did not take and VR needs to be
updated again.
To rerun the update:
•
On the node the update failed, open registry edit and navigate to the
o
following key:
Hkey_Local_Machine\Software\Compaq\StorageWorksNAS
o
Delete the key named SWVRInstState
o
Open the cluster setup tool and rerun the SWVR upgrade process
o
WARNING : Using Registry Editor incorrectly can cause serious problems that may
require you to reinstall your operating system. You should backup your Registry
before making any changes. Use Registry Editor at your own risk.
For information about how to backup, edit, and restore the Registry in Windows 2000,
see Microsoft Knowledge Base Article Q322755:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q322755
Once the installation is confirmed download and install the following patch:
Compaq SANworks Virtual Replicator Update. (SoftPaq 2829)
http://h18006.www1.hp.com/support/files/server/us/download/16247.html
Installation Instructions for clustered systems:
1. Migrate all resources to a single node of the cluster using Cluster Administrator.
2. On the node from which the resources were removed, install Smart Component
CP002829.EXE.
3. Click 'Install' at the Compaq Package Setup screen.
4. Click 'Install' at the Compaq Setup screen.
5. All the necessary files will be extracted to C:\CP002829.
6. Browse to "C:\Winnt\System32\Drivers."
7. Rename the file CPQVRBus.sys to CPQVRBus.sys.bak.
8. Copy the file "C:\CP002829\CPQVRBus.sys" to the directory
C:\Winnt\System32\Drivers."
9. Browse to "C:\Program Files\Compaq\SANWorks Virtual Replicator 2.5\WDM"
10. Rename the file CPQVRBus.sys to CPQVRBus.sys.bak.
11. Copy the file "C:\CP002829\CPQVRBus.sys" to the directory C:\Program
Files\Compaq\SANWorks Virtual Replicator 2.5\WDM"
12. Browse to "C:\Winnt\System32."
13. Rename the file Sdapi.dll to Sdapi.dll.bak.
14. Copy the file "C:\CP002829\Sdapi.dll to the directory "C:\Winnt\System32."
15. Browse to "C:\Program Files\Compaq\SANWorks Virtual Replicator 2.5."
16. Rename the file Sdapi.dll to Sdapi.dll.bak.
17. Rename the file VRRegMon.exe to VRRegMon.exe.bak.
18. Copy the file "C:\CP002829\Sdapi.dll to the directory "C:\Program
Files\Compaq\SANWorks Virtual Replicator 2.5."
19. COpy the file "C:\CP002829\VRRegMon.exe to the directory "C:\Program
Files\Compaq\SANWorks Virtual Replicator 2.5."
[Document Restriction Notice]
24