Verify Installation - Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Installation Manual

[Enter your Document Title]
4. Enter the password for the account (if there is one) and click Next.
5. At the next dialog box, click Finish to complete configuration.
6. The Cluster service will start. Click OK.
7. Close Add/Remove Programs.

Verify Installation

There are several ways to verify a successful installation of the Cluster service.
Here is a simple one:
1. Click Start, click Programs, click Administrative Tools, and click Cluster
Administrator.
Figure 14. Cluster Resources
The presence of two nodes (Entapp12 and Entapp13 in Figure 14 above)
shows that a cluster exists and is in operation.
Right-Click on one of the groups and select the option Move. The group and all its
2.
resources will be moved to the other node. After a short period of time the cluster
resources will be brought online on the other node. This shift will display on the screen.
Close the Cluster Administrator snap-in.
3. If this test fails, then the cluster configuration was not successful. Further information can
be found in the event logs and it may be necessary to reinstall cluster services on one of
the nodes.
[Document Restriction Notice]
21