To Set The Scan-Restart Delay Time - Yaesu VX-8R Operating Manual

To set the Scan-Restart Delay Time:

1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 82: SCAN
RE-START. RE-START RE-START
RE-START RE-START
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired Scan-Restart
Delay Time. Available selections are 0.1sec
(0.1sec/step) and 1.0sec
5. Press the PTT switch to save the new setting and exit to
normal operation.
The default condition for this Set Mode Item is "2.0sec".
VX-8R O
PERATING
G
ENERAL
key for one second to enter the Set Mode.
1.0sec - 10.0sec 10.0sec (0.5sec/step).
1.0sec 1.0sec 1.0sec 10.0sec 10.0sec 10.0sec
M
ANUAL
82: SCAN 82: SCAN
82: SCAN 82: SCAN
0.1sec - 0.9sec
0.1sec 0.1sec 0.9sec 0.9sec 0.9sec
0.1sec 0.9sec
S
CANNING
61