Ctcss/Dcs/Epcs Operation; Ctcss Operation - Yaesu VX-8R Operating Manual

50/144/430 mhz triple-band heavy duty submersible transceiver
Hide thumbs Also See for VX-8R:
Table of Contents

Advertisement

CTCSS/DCS/EPCS O
Many repeater systems require that a very-low-frequency audio tone be superimposed on
your FM carrier in order to activate the repeater. This helps prevent false activation of the
repeater by radar or spurious signals from other transmitters. This tone system, called
"CTCSS" (Continuous Tone Coded Squelch System), is included in your VX-8R, and is
very easy to activate.
CTCSS setup involves two actions: setting the Tone Frequency and then set-
ting the Tone Mode. These functions are set up using Set Mode Items 94:
SQL TYP and 98: TONE FREQUENCY.
1. Press the
key, then press the
Item 95: SQL TYPE
95: SQL TYPE
95: SQL TYPE
95: SQL TYPE.
95: SQL TYPE
2. Rotate the DIAL knob so that "TONE
play. This activates the CTCSS Encoder.
3. Rotation of the DIAL knob one more "click" in step "2"
above will also activate the "TSQL
Tone Squelch system is active, which mutes your VX-8R's receiver until it receives a
call from another radio sending out a matching CTCSS tone. This can helpful in a
high RF congested location by keeping your radio quiet until a call is received from a
specific station with a matching CTCSS tone.
You may notice an additional "DCS
the DIAL knob in step 3 above. We'll discuss the Digital Code Squelch sys-
tem shortly.
You may notice "REV TONE
DIAL knob in step 3 above. When the Reverse Tone Squelch system is ac-
tive, the VX-8R's receiver is muted when it receives a call from a radio send-
ing a matching CTCSS tone. The "RTN
when the Reverse Tone Squelch system is activated.
You may notice "PR FREQ
DIAL knob in step 3 above, this means the user programmed Reverse CTCSS
Decoder will mute your VX-8R's receiver when it receives a call from a
radio sending a CTCSS tone matching your programmed tone (determine by
Set Mode Item 70: PR FREQUENCY
display when the Reverse CTCSS Decoder is activated.
You may notice "PAGER
you rotate the DIAL knob in step 3 above. These appear when the "Enhanced
Paging & Code Squelch" and the "Message Feature" are activated. We'll
discuss these functions later.
34
CTCSS O
key. This provides a "Short-cut" to Set Mode
TONE" appears on the dis-
TONE
TONE
TONE
TSQL" decode function. When "TSQL
TSQL
TSQL
TSQL
DCS" indication appearing while you rotate
DCS
DCS
DCS
REV TONE" indication on the display while you rotate the
REV TONE
REV TONE
REV TONE
PR FREQ" indication on the display while you rotate the
PR FREQ
PR FREQ
PR FREQ
70: PR FREQUENCY). The "PR
70: PR FREQUENCY
70: PR FREQUENCY
70: PR FREQUENCY
PAGER" and "MESSAGE
MESSAGE" indication on the display while
PAGER
PAGER
MESSAGE
MESSAGE
PAGER
MESSAGE
PERATION
PERATION
RTN" icon will appear on the display
RTN
RTN
RTN
PR" icon will appear on the
PR
PR
PR
VX-8R O
TSQL" is displayed, the
TSQL
TSQL
TSQL
M
PERATING
ANUAL

Advertisement

Table of Contents
loading

Table of Contents