Changing The Set Mode Cursor; Masking The Set Mode Items - Yaesu VX-8R Operating Manual

C S
HANGING THE
The VX-8R has nine types of cursor symbol formats for the Set Mode operation. You may
change the default setting to any of the available symbols.
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 86: SET
MODE CSR MODE CSR. MODE CSR MODE CSR MODE CSR
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired cursor symbol
type.
, , , ,
5. When you have completed your selection, press the PTT
switch to save the new setting and exit to normal operation.
M S
ASKING THE ET
There may be situations where you want to "Mask" Set Mode Items so they are not re-
called during Set Mode Item selection.
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 35: EX-
TENDED MENU. TENDED MENU TENDED MENU
TENDED MENU TENDED MENU
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select "ON
key briefly.
5. Rotate the DIAL knob to select the Set Mode Item to be
"Masked".
6. Press the
right side of the Set Mode Item Number in the display, indi-
cating the Set Mode Item is to be Masked.
7. Repeat steps 5 and 6 above, to append the " " icon to any
other Set Mode Item you wish to "Masked".
8 When you have completed your selection, press the PTT
switch to save the new setting and exit to normal operation.
To unmask the hidden Set Mode Item, repeat the above procedure. In step 4 above select
"OFF OFF" and in step 6 above the " " icon will disappear from the Menu Item you wish to
OFF OFF OFF
unmask.
VX-8R O
PERATING
G
M C
ET ODE URSOR
key for one second to enter the Set Mode.
, , , , or
M I
ODE TEMS
key for one second to enter the Set Mode.
ON", then press the
ON ON
ON
key briefly. A " " icon will appear at the
M
ANUAL
ENERAL
86: SET 86: SET 86: SET
86: SET
35: EX- 35: EX-
35: EX- 35: EX-
S M
ET ODE
137