Setting The Channel Counter Sweep Width - Yaesu VX-8R Operating Manual

S C
ETTING THE HANNEL
You may change the bandwidth of the Channel Counter. Available selections are ±5, ±10,
±50, and ±100 MHz (default: ±5 MHz).
Here is the procedure for setting the Channel Counter Bandwidth:
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 19: CH
COUNTER COUNTER. COUNTER
COUNTER COUNTER
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired bandwidth (see
above).
5. Press the PTT switch briefly to save the new setting and
exit to normal operation.
VX-8R O
PERATING
C
HANNEL
C S
OUNTER WEEP
key for one second to enter the Set Mode.
M
ANUAL
C
OUNTER
W
IDTH
19: CH 19: CH
19: CH 19: CH
O
PERATION
99