To Set The Speed; To Set A Delay Time - Yaesu FT-8800R Operating Manual

5. Press and hold in the
6. While still holding the
transmit the tone string.
Once you have pressed the
will transmit the whole
Autodialer

To set the speed:

The speed at which the
1. Press the
2. Rotate the
3. Press the
desired speed.
•
50MS
•
75MS
•
100MS
4. Press and hold in the
normal operation.

To set a delay time:

You can also set a longer delay between the time you press the
pressed)
and when the first DTMF digit is sent.
1. Press the
2. Rotate the
3. Press the
desired time (
4. Press and hold in the
normal operation.
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
switch.
PTT
switch in, press the
PTT
0.
key in the above step, you can release the
string automatically.
DTMF
digits are sent can be changed.
DTMF
momentarily to enter the
SET key
knob to select
DIAL
knob momentarily, then rotate the
DIAL
: High: 20 digits per second
: Mid: 13 digits per second
: Low: 10 digits per second
knob for ½ second to save the new setting and exit to
DIAL
0.
momentarily to enter the
SET key
knob to select
DIAL
knob momentarily, then rotate the
DIAL
, , ,
50MS 250MS 450MS
knob for ½ second to save the new setting and exit to
DIAL
0.
band
Main
mode.
Set
.
Menu #14 DTMF S
mode.
Set
.
Menu #13 DTMF D
, or ).
750MS 1000MS
DTMF
key momentarily to
switch, as the
PTT
knob to select the
DIAL
key (with PTT switch
knob to select the
DIAL
Page 60 of 83