Dtmf Operation; Manual Dtmf Tone Generation; Dtmf Autodialer; Dtmf Autodial Storage Procedure - Yaesu VX-8R Operating Manual

50/144/430 mhz triple-band heavy duty submersible transceiver
Hide thumbs Also See for VX-8R:
Table of Contents

Advertisement

DTMF O
PERATION
The VX-8R's keypad allows easy DTMF dialing for Autopatch, repeater control, or Internet-
link access purposes. Besides numerical digits [ 0 ] through [ 9 ] , the keypad includes the
[ ] and [ # ] digits, plus the [ A ] , [ B ] , [ C ] , and [ D ] tones often used for repeater control.
M
DTMF T
ANUAL
You can generate DTMF tones during transmission manually.
1. Press the PTT switch to begin transmission.
2. While transmitting, press the desired numbers on the keypad.
3. When you have sent all the digits desired, release the PTT key.
DTMF A
UTODIALER
Nine DTMF Autodial memories are provided, allowing you to store telephone numbers
for autopatch use. You can also store short autopatch or Internet-link access code streams
to avoid having to send them manually.
Here is the DTMF Autodial storage procedure:
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 30: DTMF
SELECT
SELECT
SELECT
SELECT.
SELECT
3. Press the
key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the DTMF Memory register
(1 1 1 1 1 - 10
10) into which you wish to store this DTMF string.
10
10
10
5. Press the
into the selected register.
6. Press and hold in the
previously-stored data, if desired.
7. Rotate the DIAL knob to select the first digit of the DTMF
string. Selectable entries are 0 0 0 0 0 - 9 9 9 9 9 , A A A A A - D D D D D ,
may select "– – – – – " to store a "Pause", if needed.
8. Press the
9. Repeats steps 7 and 8 to program the remaining the DTMF
string.
10. Press and hold in the
previously-stored data after the cursor.
11. If you make a mistake, press the
cursor, re-enter the correct number.
12. Press the PTT switch briefly to save the new setting and
exit to normal operation. To store other numbers, repeat this
process, using a different DTMF memory register.
114
G
ONE
ENERATION
key for one second to enter the Set Mode.
key briefly to begin DTMF Memory entry
key for two seconds to clear the
key to move to the next character.
key for two seconds to delete the
30: DTMF
30: DTMF
30: DTMF
30: DTMF
, and # # # # # . You
key to back-space the
VX-8R O
M
PERATING
ANUAL

Advertisement

Table of Contents
loading

Table of Contents