Table of Contents
Advertisement
Bluetooth
Installation of the optional BU-1 Bluetooth
send/receive voice messages with the optional BH-1 or BH-2 Bluetooth
wireless links.
P
AIRING
When using the Bluetooth
VX-8R must be paired.
1. Make sure that the VX-8R and BH-1 ( or BH-2 ) are both off.
2. Press and hold in the
3. Press and hold the
4. Rotate the DIAL knob to select Set Mode Item 16:
BLUETOOTH P-CODE
BLUETOOTH P-CODE
BLUETOOTH P-CODE.
BLUETOOTH P-CODE
BLUETOOTH P-CODE
5. Press the
key briefly to enable selection of this Set Mode
Item.
6. The default PIN code (6111
You may change the PIN code, if desired, before continu-
ing with step 7.
1) Press the
2) Rotate the DIAL knob to set the first digit of the PIN code.
3) Press the
place.
4) Repeat the previous steps to complete the PIN code. If you make a mistake, press
the
key to move back to the incorrect number, then re-enter the correct
number.
7. Bring the BH-1 ( or BH-2 ) close to the VX-8R, then press and hold in the POWER
switch of the BH-1 ( or BH-2 ) until the LED indicator blinks red/blue alternately
(approximately five seconds).
8. Press the
key to initiate the pairing.
9. If the pairing is successful (requires about 20 to 30 seconds), "
the display of the VX-8R and the LED indicator of the BH-1 ( or BH-2 ) will blink
blue.
10. Press the PTT switch of the VX-8R to save the new setting and return to normal
operation.
72
O
®
PERATION
®
Headset for the first time, the Bluetooth
( PWR ) switch for 2 seconds to turn the VX-8R on.
key for one second to enter the Set Mode.
6111) will appear.
6111
6111
6111
key to enable changing of the PIN code.
key to save the first digit of the PIN code and move on to the next
®
Adapter Unit will enable, the VX-8R to
16:
16:
16:
16:
VX-8R O
®
Headset via
®
Headset and the
" icon will appear on
M
PERATING
ANUAL
Advertisement
Table of Contents
