Table of Contents
Advertisement
S
M
ET
ODE
R
S
EPEATER
ETTING
Enables/Disables the Automatic Repeater Shift function.
Sets the Repeater Shift Direction.
Sets the magnitude of the Repeater Shift.
CTCSS/DCS/EPCS S
ETTING
Selects the number of Bell ringer repetitions.
Enables/Disables the Bell ringer function and its sound selection.
Setting of the DCS code.
Enables/Disables the "Inverted" DCS tone.
Enables/Disables the Answer Back function of the Enhanced CTCSS Paging & Code Squelch.
Sets the Receiver Pager Code for the Enhanced CTCSS Paging & Code Squelch.
Sets the Transmitting Pager Code for the Enhanced CTCSS Paging & Code Squelch.
Program the CTCSS Tone Frequency for the User Programmed Reverse CTCSS Decoder.
Enables/Disables split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.
Setting of the CTCSS Tone Frequency
Enables/Disables the receiver audio output while the Tone Search Scanner is activated.
Selects the Tone Search Scanner speed.
ARTS
S
TM
ETTING
Select the Beep option during ARTS
TM
Select the Polling Interval during ARTS
Program and activate the CW Identifier (used during ARTS
M
S
EMORY
ETTING
Enables/Disables the Memory Bank Link Scan.
Stores Alpha-Numeric "Tag" for the Memory Bank.
Selects the channel step for the fast channel selection mode while in the Memory Recall mode.
Stores "Alpha-Numeric" tags for the Memory channels.
Enables/Disables the Memory Write Protector.
Determines the method of selecting channels for Memory Storage.
S
S
CAN
ETTING
Selects the Memory Scan channel-selection mode.
Enables/Disables the Scan Lamp (while scanner is paused).
Selects the Scan Re-start Delay time.
Selects the Receive-mode Battery Saver interval ("sleep" ratio).
Enables/Disables the Priority Revert feature.
Selects the time between the Priority (Dual Watch) channel checks, when the feature is active.
B
S
S
ATTERY
AVING
ETTING
Setting of the Automatic Power-Off time.
Enables/Disables the BUSY LED while the squelch is open.
Selects the Receive-mode Battery Saver interval ("sleep" ratio).
Enables/Disables the Transmitter Battery Saver.
M
S
ESSAGE
ETTING
Programming a Member List for the Message feature.
Selects your Personal ID for the Message feature.
Programming a Message for the Message feature.
WIRES
S
TM
ETTING
Enables/Disables the DTMF Autodialer feature while using the Internet Connection feature (WIRES
Enables/Disables the Internet Connection feature (WIRES
Selects the Access Number (DTMF digit) for SRG operation of the Internet Connection feature (WIRES
Selects the primary function of the [ INTERNET ] key.
Selects the operating mode of the Internet Connection feature (WIRES
Programming of the Access Number (DTMF code) for the FRG station of the WIRES
Internet Link System) access.
EAI S
ETTING
Enables/Disables the Emergency Automatic ID (EAI) feature.
Sets the Emergency Automatic ID (EAI) operating mode and its transmit time.
Select the alarms utilized when the Emergency function is engaged.
Bluetooth
S
®
ETTING
Pairing the Bluetooth
unit and setting the Pin Code.
®
Select the operating mode of the optional BH-1/BH-2 Bluetooth
140
operation.
TM
operation.
TM
operation).
TM
).
TM
).
®
Headset.
S
M
I
ET
ODE
TEM
74:
RPT ARS
75:
RPT SHIFT
76:
RPT SHIFT FREQ
S
M
I
ET
ODE
TEM
14:
BELL RINGER
15:
BELL SELECT
26:
DCS CODE
27:
DCS INVERSION
66:
PAGER ANS-BACK
67:
PAGER CODE-RX
68:
PAGER CODE-TX
70:
PR FREQUENCY
94:
SQL SPLIT
95:
SQL TYPE
99:
TONE FREQUENCY
100:
TONE-SRCH MUTE
101:
TONE-SRCH SPEED
S
M
I
ET
ODE
TEM
5:
ARTS BEEP
6:
ARTS INTERVAL
21:
CW ID
S
M
I
ET
ODE
TEM
7:
BANK LINK
8:
BANK NAME
52:
MEMORY FAST STEP
53:
MEMORY NAME
54:
MEMORY PROTECT
56:
MEMORY WRITE
S
M
I
ET
ODE
TEM
55:
MEMORY SKIP
81:
SCAN LAMP
82:
SCAN RE-START
83:
SCAN RESUME
71:
PRI REVERT
72:
PRI TIME
S
M
I
ET
ODE
TEM
4:
APO
18:
BUSY LED
79:
SAVE RX
80:
SAVE TX
S
M
I
ET
ODE
TEM
57:
MESSAGE LIST
58:
MESSAGE REGISTER
59:
MESSAGE SELECT
S
M
I
ET
ODE
TEM
TM
).
40:
INT MANUAL/AUTO
41:
INTERNET
TM
).
42:
INTERNET CODE
43:
INTERNET KEY
44:
INTERNET MODE
TM
(or non WIRES
TM
45:
INTERNET SELECT
S
M
I
ET
ODE
TEM
32:
EAI
33:
EAI TIME
34:
EMERGENCY SELECT
S
M
I
ET
ODE
TEM
16:
BLUETOOTH P-CODE
17:
BLUETOOTH SET
VX-8R O
( D
A
V
: B
I
VAILABLE
ALUES
EFAULT
OLD
TALIC
ON / OFF
SIMPLEX / -RPT / +RPT
0.000MHz ~ 150.000MHz (50 kHz/step)
( D
A
V
: B
I
VAILABLE
ALUES
EFAULT
OLD
TALIC
OFF / 1time - 20time / CONTINUOUS
OFF / BELL / USER BP1 / USER BP2 /
USER BP3
104 standard DCS codes (DCS 023)
RX-NORMAL, TX-NORMAL /
RX-INVERT, TX-NORMAL /
RX-BOTH, TX-NORMAL /
RX-NORMAL, TX-INVERT /
RX-INVERT, TX-INVERT /
RX-BOTH, TX-INVERT
ON / OFF
--
--
300 Hz ~ 3000 Hz (1000 Hz/step) (1600 Hz)
OFF / ON
OFF / TONE / TONE SQL / DCS / REV TONE /
PR FREQ / PAGER / MESSAGE
50 standard CTCSS tones (100.0Hz)
ON / OFF
FAST (2.5 tone/sec) / SLOW (1.25 tone/sec)
( D
A
V
: B
I
VAILABLE
ALUES
EFAULT
OLD
TALIC
IN RANGE / ALWAYS / OFF
15sec / 25sec
--
( D
A
V
: B
I
VAILABLE
ALUES
EFAULT
OLD
TALIC
--
--
10CH / 20CH / 50CH / 100CH
--
ON / OFF
NEXT / LOWER
( D
A
V
: B
I
VAILABLE
ALUES
EFAULT
OLD
TALIC
OFF / SKIP / ONLY
ON / OFF
0.1sec ~ 0.9sec (0.1sec/step) or
1.0sec ~ 10.0sec (0.5sec/step) (5.0sec)
2.0sec ~ 10.0sec (0.5sec/step) /
BUSY / HOLD (5.0sec)
ON / OFF
0.1sec ~ 0.9sec (0.1sec/step) or
1.0sec ~ 10.0sec (0.5sec/step) (5.0sec)
( D
A
V
: B
I
VAILABLE
ALUES
EFAULT
OLD
TALIC
0.5hour - 12.0hour / OFF
ON / OFF
0.2sec ~ 0.9sec (0.1sec/step) or
1.0sec ~ 10.0sec (0.5sec/step)
ON / OFF
( D
A
V
: B
I
VAILABLE
ALUES
EFAULT
OLD
TALIC
--
--
--
( D
A
V
: B
I
VAILABLE
ALUES
EFAULT
OLD
TALIC
MANUAL / AUTO
ON / OFF
DTMF 0 ~ DTMF F (DTMF 1)
INTERNET / INT SELECT / SET MODE
FRG / SRG
--
( D
A
V
: B
I
VAILABLE
ALUES
EFAULT
OLD
TALIC
ON / OFF
INT 1M ~ INT 9M, INT10M, INT15M, INT20M,
INT30M, INT40M, INT50M, COM 1M ~ COM 9M,
COM10M, COM15M, COM20M, COM30M,
COM40M, COM50M, (COM 5M)
BEEP / STROBE / BEEP & STROBE / BEAM /
BEEP & BEAM / CW / BEEP & CW / CW-ID TX
( D
A
V
: B
I
VAILABLE
ALUES
EFAULT
OLD
TALIC
0000 - 9999 (6111)
VOX: PTT / HIGH / LOW,
MODE: MONO / STEREO,
SAVE: ON / OFF
M
PERATING
ANUAL
)
)
)
)
)
)
)
)
)
)
Advertisement
Table of Contents
