Table of Contents
Advertisement
E
MERGENCY
S
EAI
ELECTING THE
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 33: EAI TIME
3. Press the
key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired EAI mode (In-
terval EAI "INT
INT" or Continuous EAI "CON
INT
INT
INT
time (1 1 1 1 1 -10
10
10
10
10, 15
15
15, 20
15
15
5. Press the PTT switch briefly to save the new setting and
exit to normal operation.
A
CTIVATING THE
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 32: EAI
3. Press the
key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select "ON
EAI feature).
5. Press the PTT switch briefly to save the new setting and
exit to normal operation (with EAI feature "ON").
When the EAI feature is activated, the "EAI
Number (or memory channel number) will appear alternately in the Memory Channel
Number Display Slot of the display.
To disable the EAI feature, just repeat the above procedure, rotating the DIAL knob to
select "OFF
OFF" in step "4" above.
OFF
OFF
OFF
The VX-8R will ignore the EAI feature when (1) the squelch is open, (2)
there is an incoming signal on the operating frequency, (3) the operating
frequency is the same as the frequency which is stored in the Memory Chan-
nel "EAI," or (4) a VHF frequency is stored in Memory Channel "EAI."
VX-8R O
PERATING
A
UTOMATIC
MODE AND ITS
key for one second to enter the Set Mode.
40, and 50
20
20, 30
20
20
30
30
30, 40
30
40
40
40
EAI
FEATURE
key for one second to enter the Set Mode.
ON
ON
M
ANUAL
E
MERGENCY
ID ( EAI ) F
T
T
RANSMIT
IME
33: EAI TIME
33: EAI TIME
33: EAI TIME.
33: EAI TIME
CON") and transmit
CON
CON
CON
50 minutes).
50
50
50
32: EAI
32: EAI
32: EAI.
32: EAI
ON" (thus activating the
ON
EAI" icon and the Band
EAI
EAI
EAI
F
EATURE
EATURE
109
Advertisement
Table of Contents
