Setting The Af-Dual Resume Mode - Yaesu VX-8R Operating Manual

AM
The VX-8R allows you to select the resume mode of the AF-Dual Operation
when a signal is received in the amateur band.
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 77:
RX AF DUAL RX AF DUAL
RX AF DUAL RX AF DUAL. RX AF DUAL
3. Press the
Menu Item.
4. Rotate the DIAL knob to select the desired resume
mode of the AF-Dual Operation:
TX 1sec - TX 10sec: TX 1sec - TX 10sec TX 1sec - TX 10sec
TX 1sec - TX 10sec TX 1sec - TX 10sec
TRX 1sec - TXR 10sec: When the selected time passes after the amateur
TRX 1sec - TXR 10sec TRX 1sec - TXR 10sec
TRX 1sec - TXR 10sec TRX 1sec - TXR 10sec
HOLD HOLD: HOLD
HOLD HOLD
5. When you have made your selection, press the PTT switch to save the new
setting and resume normal mode.
VX-8R O
PERATING
FM B
AND ROADCAST
S AF-D
ETTING THE
key for one second to enter the Set Mode.
key briefly to enable selection of this
Sets the period of time
after you transmit an
amateur signal before the AM or FM Broadcast sta-
tion will be heard from the speaker, and the AF-
Dual Operation is resumed. However, if a signal is
received in the amateur band, the AF-Dual Opera-
tion will halt on the amateur band frequency and
the AF-Dual Operation does not resume.
band signal drops or transmission is over, the AM
or FM Broadcast station will be heard from the
speaker and the AF-Dual Operation is resumed.
When a signal is received in the amateur band or if
you transmit on the amateur band, the AF-Dual Op-
eration will halt on the amateur band frequency (the
AF-Dual Operation does not resume.). You must
manually re-initiate the AF-Dual Operation, if you
wish to resume.
M
ANUAL
R
ECEPTION
R M
UAL ESUME ODE
77: 77: 77: 77:
O
PERATION
25