Reset Procedure/Clone; Reset Procedure; Microprocessor Resetting; Set Mode Resetting - Yaesu FTM-3100R Operating Manual

Hide thumbs Also See for FTM-3100R:

Table of Contents

Reset Procedure/Clone

In some instances of erratic or unpredictable operation, the cause may be corruption of

data in the microprocessor (due to static electricity, etc.). If this happens, resetting the

microprocessor may restore normal operation. Note that all memories will be erased if

you do a complete microprocessor reset, as described below.

To clear all memories and other settings to factory defaults:

1. Turn the radio OFF.

2. Press and hold the [ TXPO ] , [ MHz ( SETUP )] , and [ V/M ( MW )] keys while turning the

radio on. The "ALL RESET PUSH V/M KEY" notation will scroll on the display.

3. Press the [ V/M ( MW )] key momentarily to reset all settings to their factory defaults

(press any other key to cancel the Reset procedure).

To reset the Set (Menu) mode settings to their factory defaults, while leaving other set-

tings unchanged:

1. Turn the radio OFF.

2. Press and hold the [ TXPO ] and [ MHz ( SETUP )] keys while turning the radio on. The

"SET MODE RESET PUSH V/M KEY" notation will scroll on the display.

3. Press the [ V/M ( MW )] key momentarily to reset the Set (Menu) mode settings to their

factory defaults (press any other key to cancel the Reset procedure).

The FTM-3100R/E includes a convenient "Clone" feature, which allows the memory and

configuration data from one transceiver to be transferred to another FTM-3100R/E.

This can be particularly useful when configuring a number of transceivers for a public

service operation.

Note: For details, refer to the Advanced Manual (download from the Yaesu website).

FTM-3100R/E Operating Manual

Table of Contents

Ftm-3100e