Store; Store Mode - Simrad SP70 - REV D Operator's Manual

Simrad SP70
152

Store

The Store button is located in the Store/Recall menu, which is
accessed from the Setup menu.
The Store button is used to store display information. This may
be a sequence loop or single display pictures, as selected in the
Store mode dialogue.
If a sequence loop storage is selected, the Store button is used
for start and stop of the storage. If single picture storage is
selected, a new picture storage is made each time the Store
button is pressed.

Store Mode

The Store Mode button is located in the Store/Recall menu,
which is accessed from the Setup menu.
The Store Mode dialogue is used to select the storage function
of the Record button on the Sonar Operating Panel and the
Store button in the Store/Recall menu. The storage can be
selected to contain single shots, or different ping- or time
sequences.
Related topics
→
Sonar Operating Panel; Record, page 42
850-164186 / Rev.D