334
CMYK Workflow
To set the RGB workflow options:
In the
1.
RGB Workflow
•
To use the embedded CSA or source CSA, select
•
To use a Spire or Adobe CSA, select a CSA from the list. The
default option is
•
To use a custom RGB profile, select the profile name from the list.
In the
2.
Rendering intent
For more information about choosing the correct rendering intent, see To
set the RGB workflow options: on page 334.
Select the
3.
Print grays using black toner
gray text and graphics to be printed with black toner only.
Note: The Print grays using black toner check box not only affects
R=G=B values, but may also cause slightly different values
(R+/-4=G+/-4=B+/-4) to produce gray.
list, select the required RGB source profile:
.
SpireRGB_2.1
list, select the required option
check box if you want RGB
Chapter 7 – Color Workflow
.
Use SourceCSA