Xerox C8 - DocuPrint Color Inkjet Printer User Manual page 61

Setting PPD File Parameters
Table 4: PPD parameters
PPD Parameter
Slip Sheet
Finisher Module
Finisher Offset
Staple Options
Printing Options
inserts a sheet offset from the job stock between jobs or copies of a
Yes
job or at the end of uncollated stacks of pages.
does not insert any slip-sheets.
No
To select the printed output's destination, select a finisher module from
the list:
(Offset Catch Tray) prints to the output cache tray.
OCT
If your printer is equipped with an HCS (High Capacity Stacker), select:
to print to the top tray.
HCS Top Tray
to print to the stack tray, which is the internal tray.
HCS Stack Tray
If your printer is equipped with an HCSS (High Capacity Stacker
Stapler), select:
to print to the top tray.
HCSS Top Tray
to print to the stack tray (usually for many pages or
HCSS Stack Tray
copies).
to print a document that is already stapled.
HCSS Staple Stack
/
DFA Profile 1 DFA Profile 2
prints to the DFA (Document Finishing Architecture)
DFA Profile 5
device. Select the desired profile according to the profile set in the Xerox
DocuColor 8000 Digital Color Press.
shifts the sheets when a new page number is delivered. For example,
Yes
if you requested three copies of each page uncollated, the printing
output sequence is as follows, Page1, Page1, Page1, Offset, Page2, Page2,
Page2, Offset, and so on.
does not use this printing method.
No
Landscape - Single TL
Landscape - Single TR
Landscape - Dual Right
Landscape - Dual Left
two staples along the top.
Landscape - Dual Top
a single staple in the top left corner.
Portrait - Single TL
a single staple in the top right corner.
Portrait - Single TR
two staples along the right side.
Portrait- Dual Right
two staples along the left side.
Portrait - Dual Left
two staples along the top.
Portrait - Dual Top
/
DFA Profile 3 / DFA Profile 4 /
a single staple in the top left corner.
a single staple in the top right corner.
two staples along the right side.
two staples along the left side.
47