Xerox C8 - DocuPrint Color Inkjet Printer User Manual page 332

318
Step 4 of the Color Calibration Wizard appears.
Note: If at any stage the scanning has not been completed properly, click Reset
and scan again.
Center the cyan column under the alignment mark on the
14.
densitometer. Slowly insert the
the X-Rite DTP32HS densitometer until it is automatically advanced
by the densitometer motor. The green light slowly flashes while the
chart is pulled through the densitometer and out the back.
A beep sounds when the scan is complete and the green light stops
flashing. A check mark appears next to the cyan icon and instructions
appear for scanning of the next column (magenta).
Chapter 7 – Color Workflow
Image Density Calibration Chart
to