Imposition Templates - Xerox C8 - DocuPrint Color Inkjet Printer User Manual

238

Imposition Templates

•
is used when you find that the page images are too close to
Creep out
the spine. This problem can be resolved by selecting a value for
. This will move all the pages of the job further out towards the
out
outside margin (away from the spine) by the specified amount. This
movement takes place before the
To set the creep options:
In the area, select
1. Creep in
on paper stock weight
Or:
Type the desired amount for
In the area, type the desired amount.
2. Creep out
Note: Units of measurement (mm or inches) are set in the Settings window,
see Localization on page 409.
There are three types of templates you can use in the Spire CXP8000 color
server:
•
Collating templates, see Collating Templates on page 239
•
Predefined imposition templates, see Spire CXP8000 Color Server
Predefined Imposition Templates on page 239
•
User defined imposition templates, see User Defined Imposition
Templates on page 245
Chapter 6 – Production Printing
value is applied.
Creep in
to automatically set the
Auto
.
Creep in
Creep
based
Creep in