option is generally used to make last-minute adjustments to
the print job after proofing.
Note: Changing the contrast level for an RTP job, does not require re-RIPing of
To select a contrast level for the print job, move the
the required contrast level (the range starts from
- which applies +10%).
Note: When you set the slider to Normal, no change is applied.
enables you to import and delete source and
destination ICC profiles, and map destination profiles to specific paper
Source profiles are used to emulate other devices, or color spaces. You can
import source CMYK or RGB profiles. To use a profile in a job, in the Job
Parameters window, select
, depending on the profile you imported.
Note: Custom source RGB profiles are not available in the CSA emulation mode.
For more information about selecting a source profile in a job, see RGB
Workflow on page 333 and CMYK Workflow on page 334.
Destination profiles define the color space of your printer and are based on
the combinations of paper and toner that you are using. For different
paper stocks, you need different destination profiles. Each custom
destination profile will be used with coated and uncoated paper. To use a
different destination profile in a job, in the Job Parameters window, select
For more information about selecting a destination profile in a job, see
Destination Profile on page 338.
Chapter 7 – Color Workflow
- which applies -