Spire Web Center
To connect to the web center from a client workstation:
Important: To connect to the Spire Web Center from a client workstation, you
must first enable the web connect service on the Spire CXP8000 color server. To
enable this service, select the Settings window>Administration>Remote
Tools Setup.
For more information about setting up the web connect service, see Remote
Tools Setup on page 399.
On your desktop, click the
1.
When the Internet Explorer starts, in the address field type:
2.
http://<spire name>—for example, if the Spire station name is
FALCON_E, type http://FALCON_E.
Note: You can also use the Spire color server IP address—for example,
http://192.168.92.0.
Important: If you would like to connect to the Spire CXP8000 color server
from a Macintosh client workstation, contact your system administrator to
add the Spire name to the DNS. This is required since Windows name
resolution protocols are not supported in Macintosh. The DNS addition is
required when clients go through a main server on the network.
icon.
Internet Explorer
77