Xerox C8 - DocuPrint Color Inkjet Printer User Manual page 307

The Finishing Tab
(High Capacity Stacker Stapler)
HCSS
Choose a tray option.
a.
If you select
b. Stack Tray
•
Use this option for both collated and uncollated jobs.
Offset:
For uncollated jobs, offset shifts the sheets when a new page
number is delivered. For example, if you request 3 copies of
each page, the printing output sequence is as follows: Page1,
Page1, Page1, offset, Page2, Page2, Page2, offset, and so on.
•
Use this option to select the desired stapling method.
Staple:
(Enhanced High Capacity Stacker and High Capacity
EHCS + HCSS
Stacker Stapler)
EHCS-1 + EHCS-2
(Enhanced High Capacity Stacker and Document
EHCS-1 + DFA
Finishing Architecture)
(Document Finishing Architecture)
DFA
Select the desired
a. Profile
in the printer you are using).
Select the desired
b. Function
printer you are using).
, select one of the following check boxes:
from the list (according to the profile set
(according to the profile set in the
293