Xerox C8 - DocuPrint Color Inkjet Printer User Manual page 247

Imposition Workflow
If the parameters conflict, you will see where the conflicts exist when you
preview the template layout:
•
Red corners indicate that the trim size is bigger than the sheet size.
•
Yellow corners indicate unsuitable margin settings—for example, if
the margin size is unsuitable.
•
Dotted lines indicate conflicting trim size settings and template
settings (for example, A3 trim for Step & Repeat 2x2 Duplex template).
Note: You can preview the imposed job in the Job Editor window, Imposed
sheets tab, see Viewing Pages in the Job Editor on page 204.
Margins
The parameter enables you to adjust the spaces between the
Margins
outside edges of pages and the edges of the sheet on which they are printed.
Margin settings should suit finishing equipment and requirements.
Confirm binding parameters with your binder when planning your sheet.
233