Selecting Staple Options; Setting The Image Size To Trim Size Ratio In Imposition; Printing From A Macintosh Computer: Driver Requirements; Printing From Windows: Driver Requirements - Xerox C8 - DocuPrint Color Inkjet Printer Release Note

Selecting Staple Options

Regardless of whether the image orientation is set to Portrait or Landscape, the available staple
options include both Portrait and Landscape. Be sure to select the staple orientation option that
matches your image orientation. If you do not, the image might be cropped.

Setting the Image Size to Trim Size Ratio in Imposition

Make sure that the ratio of image size to trim size is less than 3.0. If the value is greater, the job
might fail to print. For example, do not place two tabloid size images that are trimmed to letter
size on a tabloid size sheet.

Printing From a Macintosh Computer: Driver Requirements

The supported Mac OS
version of the operating system that you use. Unknown problems can occur if other drivers are
used.
Mac Recommended Printer Driver
9.x. and higher LaserWriter 8.7
The Spire CXP8000 color server does not require any driver installation for Mac OS X. To print
to the Spire CXP8000 color server from Macintosh OS X, use the Print Center application, and
then select Add to add the virtual printer.

Printing From Windows: Driver Requirements

Windows
® ®
Windows NT , 2000 , XP
®
Windows ME
Windows NT and 2000 clients may be required to log on to the Spire CXP8000 color server
printer after rebooting or when logging on as a different user. The default logon name is
operator and the password is spire.
739-00031A-EN
®
is 9.x. and later. The recommended printer driver depends on the
Recommended Printer
Driver
Adobe PostScript Driver 5.2.1
Adobe PostScript Driver 4.5.2
12