Advertisement
Quick Links
®
iArmor
BEFORE INSTALLATION
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE
PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION. ASSISTANCE IS RECOM-
MENDED. THANK YOU FOR CHOOSING OUR PRODUCT!
*ROCKER PANEL MOUNT
*DRILLING MAYBE REQUIRED
PART LIST
Driver Side Step Bar
3#
3#
4#
iArmor
by APS
1#
1#
2#
Customer Support: info@iarmorauto.com
PART#: IA-S179H&S208H&S209H
Torque Value
Fastener Size
6mm
8mm
10mm
12mm
14mm
Front
2#
2#
1#
1
®
Tightening Torque (ft-lbs)
6-7
16-18
31-32
56-58
92-94
Passenger Side Step Bar
4#
4#
3#
Rev. 20220301
Required
√
√
X
X
X
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for APS iArmor IA-S179H
Summary of Contents for APS iArmor IA-S179H
- Page 1 ® ® PART#: IA-S179H&S208H&S209H iArmor by APS Torque Value BEFORE INSTALLATION Fastener Size Tightening Torque (ft-lbs) Required REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE √ STARTING INSTALLATION. ASSISTANCE IS RECOM- 16-18 √ MENDED. THANK YOU FOR CHOOSING OUR PRODUCT!
- Page 2 iArmor ® Hardware Package A (For Bracket Installation) Item Description Item Description M8 Large Flat Washers Driver Front / Center & Passenger Rear Mounting Brackets M8 Lock Washers Passenger Front / Center & Driver Rear Mounting Brackets M8X1.25 Hex Nuts Driver Front / Center &...
- Page 3 iArmor ® (Fig 6a). Do not tighten at this time. The instruction here is for your reference only. We strongly recommend the professional installer for best result. We are not Remove the M8X1.25-30mm Hex Bolts from the nut on responsible for any damage caused by the installation. the Bolt Plate from Step 2a.
- Page 4 iArmor ® Factory threaded holes on body panel M8 Plastic Washer Factory holes on pinch weld (Fig 5) Thread Plastic Washer Onto M8 Nut/Bolt Plate To Hold Nut/Bolt Plate In Position. Front IMPORTANT: Do Not Let Go Of The M8 Hex Bolt Until After Plas- tic Washer Has Been Threaded Onto Bolt (Fig 7) Driver Side Front Mounting Location (Mid 2015-On, An Example Of Models With Factory Installed Threaded Inserts)
- Page 5 iArmor ® Driver Front Mounting Bracket Driver Front Support Bracket Front (1) M8X1.25-30mm Hex Bolt (2) M8 Large Flat Washers (1) M8X1.25 Nylon Lock Nut (Fig 9) Attach Driver Front Support Bracket to the Driver Front (Fig 11) Driver Side Center Mounting Location Mounting Bracket (2) M6X1-25mm Hex Bolts (4) M6 Large Flat Washers...
- Page 6 iArmor ® STEP 5 STEP 7 Once all (3) driver side mounting brackets are installed, select Move to the passenger side of the vehicle. Repeat Steps 1-6 to and attach the Driver Side Step Bar onto the Mounting Brack- install the passenger side step bar. ets with (3) U Brackets, (3) M8X1.25-55mm Carriage Bolts, (3) Installation completed.
Need help?
Do you have a question about the iArmor IA-S179H and is the answer not in the manual?
Questions and answers