Page 1
® ® iArmor by APS PART#: IA-S054 Fastener Size Tightening Torque (ft-lbs) Required BEFORE INSTALLATION REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS √ ARE PRESENT. READ INSTRUCTIONS CAREFULLY 16-18 √ BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMENDED. THANK YOU FOR CHOOSING OUR...
Page 3
iArmor ® STEP 3 The instruction here is for your reference only. We strongly Repeat Steps 1-2 for Driver Center & Rear Mounting Brackets recommend the professional installer for best result. We are not installation. Do not fully tighten hardware at this time. responsible for any damage caused by the installation.
Page 4
iArmor ® STEP 4 STEP 6 Move to the other side of the vehicle. Repeat Steps 1-5 to in- Once all (3) driver side mounting brackets are installed, select stall passenger side step bar. and attach the Driver Side Step Bar onto the Mounting Brackets with (3) U Brackets, (6) Spacers, (3) M8X1.25-55mm Carriage Installation completed.
Need help?
Do you have a question about the iArmor IA-S054 and is the answer not in the manual?
Questions and answers