Advertisement
Quick Links
IARMOR EDGE™
BEFORE INSTALLATION
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE
PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION. ASSISTANCE IS RECOMMEND-
ED. THANK YOU FOR CHOOSING OUR PRODUCT!
*ROCKER PANEL MOUNT
*DRILLING NOT REQUIRED
PART LIST
Driver Front/
Rear Support
Bracket (DFS/
DRS)
Driver Cen-
ter Mount-
ing Bracket
Pedal
(DCM)
(DFS/DRS)
Drain
Hole at
Bottom
Driver Side Step Bar
iArmor
Driver Front/Rear
Mounting Bracket
(DFM/DRM)
(DFM/DRM)
Note:
Step bars are NOT interchangeable.
Make sure drain holes at the bottom will be
located at the rear direction of the step bars.
Customer Support: info@iarmorauto.com
Torque Value
Fastener Size
6mm
8mm
10mm
12mm
14mm
Front
Passenger Front/Rear
Mounting Bracket
(PFM/PRM)
(PFM/PRM)
1
®
PART#: IA-N177H
Tightening Torque (ft-lbs)
6-7
16-18
31-32
56-58
92-94
Passenger
Front/Rear
Support
Bracket (PFS/
PRS)
Passenger Center
Mounting Brack-
et (PCM)
(PFS/PRS)
Drain
Hole at
Bottom
Passenger Side Step Bar
Rev. 20221201
Required
√
√
X
X
X
Pedal
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for APS IARMOR EDGE IA-N177H
Summary of Contents for APS IARMOR EDGE IA-N177H
- Page 1 iArmor ® IARMOR EDGE™ PART#: IA-N177H Torque Value BEFORE INSTALLATION Fastener Size Tightening Torque (ft-lbs) Required REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE √ PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMEND- 16-18 √ ED. THANK YOU FOR CHOOSING OUR PRODUCT! 10mm 31-32 *ROCKER PANEL MOUNT...
- Page 2 iArmor ® Hardware Package A (For Brackets & Bars Installation) Item Description Item Description M8X1.25-30mm Hex Bolts M8 Clip Nuts M8X1.25-25mm Hex Bolts M6X1-20 Square Head Bolts M8 Large Flat Washers M6 Large Flat Washers M8 Flat Washers M6 Nylon Lock Nuts M8 Lock Washers M8X1.25-20 T Bolts M8 Hex Nuts...
- Page 3 iArmor ® PFM/PRM The instruction here is for your reference only. We strongly recommend the professional installer for best result. We are not responsible for any damage caused by the installation. PFS/PRS STEP 1 Install (4) Pedals onto the step bars with (24) M8X1.25-25mm (1) M8X1.25-30mm Hex Bolt (2) M8 Flat Washers Hex Bolts, (24) M8 Large Flat Washers and (24) M8 Lock...
- Page 4 iArmor ® STEP 6 STEP 4 Slide (1) M8 Clip Nut into the rectangular opening with the nut Move to the Passenger Side Center Mounting Location of the towards the inside. Line up the threaded nut on the clip with the vehicle, (Fig 5).
- Page 5 iArmor ® STEP 10 STEP 8 Continue moving to the Passenger Side Rear Mounting loca- tion (Fig 2). Repeat Steps 2-5 for Passenger Rear Mounting Bracket (PFM/PRM) installation . Attach the Assembled Passenger Side Step Bar onto the Mounting Brackets with (4) M8 Plastic Washers, (4) M8X1.25- 20mm T-Bolts, (4) M8 Flat Washers, (4) M8 Nylon Lock Nuts, STEP 9 (Fig 9).
- Page 6 iArmor ® (4) M8 Plastic Washers (4) M8X1.25-20mm T-Bolts (4) M8 Flat Washers (4) M8 Nylon Lock Nuts Front Bottom View (2) M6X1-20mm Square Head Bolts (2) M6 Large Flat Washers (2) M6 Nylon Lock Nuts (Fig 10) M6 Square Bolt in the Channel (Fig 9) Passenger Side Step Bar Installation Customer Support: info@iarmorauto.com...
Need help?
Do you have a question about the IARMOR EDGE IA-N177H and is the answer not in the manual?
Questions and answers