Advertisement
Quick Links
®
iArmor
BEFORE INSTALLATION
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS
ARE PRESENT. READ INSTRUCTIONS CAREFULLY
BEFORE STARTING INSTALLATION. ASSISTANCE IS
RECOMMENDED. THANK YOU FOR CHOOSING OUR
PRODUCT!
*ROCKER PANEL MOUNT
*NO DRILLING /TRIMMING REQUIRED
PART LIST
Driver Side Step Bar
iArmor
by APS
1#
1#
1#
Customer Support: info@iarmorauto.com
Fastener Size
Tightening Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
Front
2#
2#
2#
1
®
PART#: IA-S095H
Required
6-7
16-18
31-32
56-58
92-94
Passenger Side Step Bar
Rev. 20230101
X
√
X
X
X
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for APS iArmor IA-S095H
Summary of Contents for APS iArmor IA-S095H
- Page 1 ® ® iArmor by APS PART#: IA-S095H Fastener Size Tightening Torque (ft-lbs) Required BEFORE INSTALLATION REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY 16-18 √ BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMENDED. THANK YOU FOR CHOOSING OUR...
- Page 2 iArmor ® Hardware Package A (For Bracket Installation) Item Description Item Description Driver Front / Center / Rear Mounting Brackets U Brackets M8X1.25 Hex Flange Nuts Passenger Front / Center / Rear Mounting Brackets Hardware Package B (For Step Bar Installation) Item Description Item...
- Page 3 iArmor ® The instruction here is for your reference only. We strongly recommend the professional installer for best result. We are not responsible for any damage caused by the installation. (2) M8X1.25 Hex Flange Nuts STEP 1 Front Start the installation under the driver side of the vehicle. Locate the (2) factory studs, (Fig 1).
- Page 4 iArmor ® NOTE: Torque all M8 X1.25-55mm Car- Front riage Bolts to 16~18 Ib-ft. Don't over tighten, or the square bars will be dam- aged by the brackets M8 Large Flat Washer M8 Lock washer U Bracket M8X1.25 Hex Nut M8X1.25-55mm Carriage Bolt U Bracket...
Need help?
Do you have a question about the iArmor IA-S095H and is the answer not in the manual?
Questions and answers