Default Basic Settings - Cisco AIR-AP1220B-A-K9 - Aironet 1200 - Wireless Access Point Hardware Installation Manual

Chapter 3 Basic Configuration

Default Basic Settings

Table 3-1
Table 3-1
Parameter
System Name
Terminal Type (on serial interface only)
Config Server Protocol
IP address
IP Subnet Mask
Default Gateway
AP Radio: Internal (2.4-GHz radio)
AP Radio: Module (5-GHz radio)
Ensure Compatibility With
SNMP Admin. Community
OL-2155-02
lists the default settings on the access point's Express Setup screen.
Default Settings on the Express Setup Screen
SSID
Role in Radio Network
Optimize Radio Network For
SSID
Role in Radio Network
Optimize Radio Network For
Default Value
AP1200-xxxxxx (the last six characters of the
unit's MAC address)
teletype
DHCP
10.0.0.1
255.255.255.0
255.255.255.255
tsunami
Root Access Point
Throughput
tsunami
Root Access Point
Throughput
(none selected)
(blank)
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
Default Basic Settings
3-13