Cisco AIR-AP1220B-A-K9 - Aironet 1200 - Wireless Access Point Hardware Installation Manual page 89

Appendix B Declarations of Conformity and Regulatory Information
The Declaration of Conformity related to this product can be found at the following URL:
http://www.ciscofax.com
For 11 Mbps, 2.4 GHz access points with 100 mW radios, the following standards were applied:
• Radio:
• EMC:
• Safety:
The following CE mark is affixed to the 11 Mbps, 2.4 GHz access points with 100 mW radios:
This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to
Note
certain frequencies and/or may require a license for operation. For more details, contact Cisco Corporate
Compliance.
Combinations of power levels and antennas resulting in a radiated power level above 100 mW equivalent
Note
isotropic radiated power (EIRP) are considered as not compliant with the above mentioned directive and
are not allowed for use within the European community and other countries that have adopted the
European R&TTE directive 1999/5/EC or the CEPT recommendation Rec 70.03 or both. For more
details on legal combinations of power levels and antennas, refer to the Cisco Aironet 1200 Series Access
Point Software Configuration Guide.
For 54 Mbps, 5 GHz access points with 40 mW radios, the following standards were applied:
• Radio:
• EMC:
• Safety:
The following CE mark is affixed to the 54 Mbps, 5 GHz access points with 40 mW radios:
OL-2155-02
European Community, Switzerland, Norway, Iceland, and Liechtenstein
EN 300.328-1, EN 300.328-2
EN 301.489-1, EN 301.89-17
EN 60950
EN 301.893
EN 301.489-1, EN 301.489-17
EN 60950
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
B-5