Factory Default Settings; Firmware Upgrade - Cisco VEN401 User Manual

Factory Default Settings

The Factory Defaults screen allows you to restore the device's configuration to its
factory default settings. (An alternative method is to press and hold the Reset button
on the back panel of your device for approximately ten seconds.)
Path: Administration > Factory Defaults
Restore Default Settings—Click this button to restore settings to the factory default
values. You will be prompted to confirm or cancel the restore request.
Note: Restoring factory defaults on the device deletes custom settings. Record your
custom settings before clicking the Restore Factory Defaults button.

Firmware Upgrade

The Firmware Upgrade screen allows you to upgrade the firmware. Do not upgrade
the firmware unless you are experiencing problems with the device or the new
firmware has a feature you want to use.
Note: When up upgrade, the device may lose the settings you have customized.
Before you upgrade its firmware, write down all of your custom settings. After you
upgrade its firmware, you will have to re-enter all of your configuration settings.
4038769 Rev 01
DRAFT
Administration Setup
27