Power - Cisco AIR-AP1220B-A-K9 - Aironet 1200 - Wireless Access Point Hardware Installation Manual

Aironet 1200 series
Table of Contents

Advertisement

Chapter 1
Overview
The module contains dual integrated omnidirectional antennas and directional patch antennas for
diversity operation.

Power

The access point can receive power through an external power module or through inline power using the
Ethernet cable. Using inline power, you do not need to run a separate power cord to the access point.
Plug the Ethernet cable into the Ethernet port on the back of the access point and plug the other end into
one of the inline power sources. The access point supports the following power sources:
Caution
The 1200 series power injectors are designed for use with Cisco Aironet 1200 Series Access Points only.
Using the power injector with other Ethernet-ready devices can damage the equipment.
The 1200 series power injectors are not tested to UL 2043 and should not be placed in a building's
Caution
environmental air space, such as above suspended ceilings.
Only the 1200 series power injector and the 1200 series power module can support operation of the
Note
5.0-GHz radio in the access point.
Note
If you need to use a power module or power injector to power the access point, you must use the 1200
series power module or power injector. The 350 series power module and power injector are not
compatible with the 1200 series access point.
When using in-line power from a switch or patch panel do not connect the 1200 series power module to
Note
the access point. Using two power sources on the access point might cause the switch or patch panel to
shut down the port to which the access point is connected.
Both the Ethernet and console ports use RJ-45 connectors. Be careful not to accidently connect the
Note
Ethernet cable to the console port connector.
OL-2155-02
Inline power
A 1200 series power injector
A switch with inline power, such as the Cisco Catalyst 3524-PWR-XL switch
An inline power patch panel, such as the Cisco Catalyst Inline Power Patch Panel
A 1200 series power module (Universal power supply)
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
Key Features
1-3

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Aironet air-ap1200

Table of Contents