Basic Configuration
This chapter describes the initial configuration of the access point using the Internet browser-based
management system and the serial interface. You can also reach the management system through a Telnet
session. Consult the Cisco Aironet 1200 Series Access Point Software Configuration Guide for complete
instructions on using these interfaces.
This chapter includes the following sections:
•
Before You Start, page 3-2
Summary of Configuration Steps, page 3-2
•
•
Using the IP Setup Utility, page 3-3
Entering Basic Settings, page 3-6
•
•
Default Basic Settings, page 3-13
OL-2155-02
C H A P T E R
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
3
3-1