Returning The Cisco Ap541N To The Factory Default Settings - Cisco AP541N Quick Start Manual

REVIEW DRAFT — CISCO CONFIDENTIAL
7
Returning the Cisco AP541N
to the Factory Default
Settings
To use the Reset
following:
• To reboot the access point, press the
seconds.
• To restore the access point to the factory default settings:
1. Disconnect the access point from the network or disable all DHCP
servers on your network.
2. With the power on, press-and-hold the
10 seconds.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
button to reboot or reset the access point, do the
Reset button for less than 10
Reset button for more than
13