Table of Contents
Advertisement
Figure 3-17 Install the device using front mounting brackets and slide rails (2)
You are recommended to keep a distance of 1 U (44.45 mm/1.75 in.) between two devices to ensure
good heat dissipation.
Installing the Device on a Workbench
Without a standard 19-in rack, you can install the device on a clean workbench. During the installation,
make sure that:
The workbench is sturdy and well grounded.
The workbench is a well-ventilated environment. Keep at least 10 cm (3.94 in.) clearance around
the device for heat dissipation.
No heavy object is placed on the device.
At least 15 mm (0.59 in.) distance is provided between two devices when they are stacked one
above the other.
Wall Mounting
You can mount the WX3010 and WX3008 on concrete walls or wood walls.
Introduction to screw and wall anchor
Figure 3-18 and Figure 3-19 show the recommended sizes (in millimeters) of screws and wall anchor
used for mounting.
3-11
Advertisement
Table of Contents
