Table of Contents
Advertisement
Fixed Interfaces
Console port
The WX3000 series provides an RS-232 asynchronous serial console port, which can be used to
connect a background terminal (a PC, for example) for system debugging, configuration, maintenance,
management, and software loading.
As shown in Figure 1-9, the console cable is an 8-core cable with an RJ-45 connector at one end for the
console port of the device, and a DB-9 female connector at the other end for the 9-pin serial port of the
configuration terminal.
Figure 1-9 A console cable
Table 1-8 Console cable pinouts
RJ-45 pin
1
2
3
4
5
6
7
8
Ethernet interfaces
1)
Introduction
The WX3024 provides twenty-four 10/100/1000Base-T Ethernet ports and four 1000Base-X SFP
ports.
Each SFP port and the corresponding 10/100/1000Base-T Ethernet port jointly form a Combo interface.
Only one of the two ports of a Combo interface can be used at a time. Table 1-9 lists the SFP and
electrical Ethernet ports that form the Combo interfaces.
Table 1-9 SFP and electrical Ethernet ports of the WX3024 that form the Combo interfaces
1000Base-X SFP port
25
26
27
Signal
RTS
DTR
TXD
CD
GND
RXD
DSR
CTS
1-8
Direction
←
←
←
→
—
→
→
→
10/100/1000Base-T Ethernet port
22
24
21
DB-9 pin
7
4
3
1
5
2
6
8
Advertisement
Table of Contents
