3Com WX3008 AC POE 8GET Installation Manual page 66

Enter your choice(0-4):
You need to modify the serial interface baud rate to accelerate the file update. Select 4 from the
BootWare operation serial submenu and then modify the serial interface baud rate to 115200 bps.
Moreover, you need to set the baud rate to the same value on the configuration terminal to ensure
communication between both sides. For how to modify the baud rate, refer to section Modifying Serial
Communication Parameters on page 5-8.
Select 0 to return to the BootWare operation submenu.
======================<BOOTWARE OPERATION SERIAL SUB-MENU>=====================
|<1> Update Full BootWare
|<2> Update Extend BootWare
|<3> Update Basic BootWare
|<4> Modify Serial Interface Parameter
|<0> Exit To Main Menu
===============================================================================
Enter your choice(0-4):
Select 1 from the BootWare operation submenu. The following information appears:
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
Select Transfer > Send file in the HyperTerminal window. The following dialog box appears.
Figure 5-5 File transmission dialog box
Click Browse to select the application file to be downloaded, select Xmodem from the Protocol
drop-down list, and click Send. The following dialog box appears:
5-11
|
|
|
|
|