Table of Contents
Advertisement
After pushing the device into the rack, make sure that the upper edges of the rear mounting brackets
fixed on the rack have close contact with the weight-bearing screws on the device, as shown in Figure
3-11.
Figure 3-11 Install the device using front and rear mounting brackets (2)
(1) Rear square-holed bracket
(3) Rear mounting bracket
Step6 Fix the front mounting brackets on the front square-holed brackets of the rack with screws and cage
nuts. Make sure that the device is firmly fixed on the rack through the front and rear mounting brackets,
as shown in Figure 3-12.
(2) Weight-bearing screw
3-7
Advertisement
Table of Contents
