Maintaining The Application And Configuration Files; Displaying All Files; Setting The Application File Type - 3Com WX3008 AC POE 8GET Installation Manual

Maintaining the Application and Configuration Files

You can modify the types of the files on the access control engine and view the file information through
the file control submenu or the CLI.
You can maintain the files on the switching engine only through the CLI, rather than the BootWare
menu.
Select 4 from the BootWare main menu to enter the file control submenu. The following information is
displayed:
=================================<File CONTROL>================================
|Note:the operating device is flash
|<1> Display All File(s)
|<2> Set Application File type
|<3> Delete File
|<0> Exit To Main Menu
===============================================================================
Enter your choice(0-3):

Displaying All Files

Displaying all files through the BootWare menu
Select 1 from the file control submenu. The following information appears:
Display all file(s) in flash:
'M' = MAIN
==============================================================================
|NO. Size(B)
|1 19189956
|2 855
==============================================================================
Displaying all files in the CLI
<System>dir
Directory of flash:/
0 -rw- 19189956 Apr 27 2009 13:21:20 main.bin
1 -rw- 855 Nov 27 2061 11:07:24 startup.cfg
54610 KB total (29377 KB free)

Setting the Application File Type

Setting the application file type in the BootWare menu
Select 2 from the file control submenu. The following information appears:
'M' = MAIN
'B' = BACKUP
Time
Aug/08/2008 20:00:00 M
Aug/08/2008 20:00:00 N/A
'B' = BACKUP 'S' = SECURE
'S' = SECURE 'N/A' = NOT ASSIGNED
Type Name
flash:/main.bin
flash:/startup.cfg
'N/A' = NOT ASSIGNED
5-22
|
|
|
|
|
|
|
|