Table of Contents
Advertisement
==============================================================================
|NO. Size(B)
|1
19189956
|0
Exit
==============================================================================
Enter file No:
Enter the file number at the prompt above. In this example, type 1 for main.bin, and press Enter. The
system prompts you to specify a new file type:
Modify the file attribute:
==============================================================================
|<1> +Main
|<2> -Main
|<3> +Backup
|<4> -Backup
|<0> Exit
==============================================================================
Enter your choice(0-4)
Select 1 to set the file type to M, 2 to remove the current M type, 3 to set the file type to B, and 4 to
remove the current B type. For detailed description of the file types, refer to section Application Files on
page 5-2.
Setting the application file type through the CLI
# Change the type of main.bin from B to M+B.
<System> boot-loader file main.bin main
This command will set the boot file. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot!
Now the file type of main.bin has been changed to M+B and the file will used as the main application file
at the next boot of the device. If an M-type file already exists, it has become an N-type file automatically.
Deleting a File
Deleting a file through the BootWare menu
Select 3 from the file control submenu. The following information appears:
Deleting the file in flash:
'M' = MAIN
==============================================================================
|NO. Size(B)
|1
19189956
|2
855
|0
Exit
==============================================================================
Enter file No:
Enter the file number and press Enter. The following information appears:
The file you selected is flash:/startup.cfg,Delete it? [Y/N]
Press Y to proceed. When the following information appears, the file has been successfully deleted:
Time
Aug/08/2008 20:00:00 M
'B' = BACKUP
Time
Aug/08/2008 20:00:00 M
Aug/08/2008 20:00:00 N/A
Type
Name
flash:/main.bin
'S' = SECURE
'N/A' = NOT ASSIGNED
Type
Name
flash:/main.bin
flash:/startup.cfg
5-23
|
|
|
|
|
|
|
|
|
|
|
|
Advertisement
Table of Contents
