3Com WX3008 AC POE 8GET Installation Manual page 15

LED Mark
PoE/PoE+ status
LED Mode
(green/yellow)
RPS status LED
RPS
(yellow/green)
10/100/1000
Base-T Ethernet
—
port status LED
(yellow/green)
Gigabit SFP port
status LED —
(yellow/green)
Extension slot MOD1
LED (or
(yellow/green) MOD2)
Status
Solid green
Blinking green (3 Hz)
Solid yellow
Blinking yellow (3 Hz)
Off
Solid green
Solid yellow
Off
Solid green
Blinking green (33
Hz)
Solid yellow
Blinking yellow (33
Hz)
Blinking yellow (3 Hz)
Off
Solid green
Blinking green (33
Hz)
Solid yellow
Blinking yellow (33
Hz)
Blinking yellow (3 Hz)
Off
Solid green
Solid yellow
Blinking green
Blinking yellow
Off
1-7
Description
The PoE/PoE+ is operational.
PoE/PoE+ supply is not available because
the maximum output power of the port is
exceeded or the remaining power is
insufficient.
The ports cannot provide PoE/PoE+ supply
due to an over-temperature, over-voltage, or
under-voltage protection shutdown of the
PoE/PoE+ system.
At least one port failed to pass the POST; if
the PoE sub-board is in position, it may be
caused by a UART communication failure or
some other self test failure.
No PoE/PoE+ supply.
Both AC and DC inputs are normal.
The AC input is abnormal or no AC input is
present, while the DC input is normal.
No DC input is present.
A 1000 Mbps link is present on the port.
The port is receiving or transmitting data at
1000 Mbps.
A 10/100 Mbps link is present on the port.
The port is receiving or transmitting data at
10/100 Mbps.
The port failed to pass the POST.
No link is present on the port.
A 1000 Mbps link is present on the port.
The port is receiving or transmitting data at
1000 Mbps.
A 100 Mbps link is present on port.
The port is receiving or transmitting data at
100 Mbps.
The port failed the POST.
No link is present on the port.
An extension module is present in the slot.
The slot does not support the extension
module installed in it.
The extension module is receiving or
transmitting data.
The extension module failed the POST.
No extension module is present in the slot or
the extension module is not connected.