FUTABA 12Z Series Instruction Manual page 83

AIL to BRAKEFLP
in the aileron mode. When the aileron stick
is manipulated, the aileron and brake flaps
perform the aileron operation simultaneously
and the operation characteristic of the roll axis is
improved.
call the setup screen shown below by pushing the
enter button.
[Return Key]
switching
(For more information, refer to
the description at the back of
this manual.)
data input dial to the left and push the enter
(For a description of the switch selection method,
see the description at the back of this manual.)
data input dial.
*When the mixing direction is reversed by the linkage,
(Chip Aileron)
*For a description of the curve setting method, see the
description at the back of this manual.
turn the
FLP 4
FLP 3
(Brake Flap) (Brake Flap)
AIL1
(Main Aileron)
(Main Aileron)
AIL 3
*The display screen is an example. The actual
screen depends on the model type.
(Currently selected condition name)
PUSH
adjustments can be made by reversing the mixing rate
polarity (+ or -).
(For a description of the curve setting method, see
the description at the back of this manual.)
<Model Menu (Airplane/Glider Functions)>
AIL 2
AIL 4
(Chip Aileron)
[Cursor Lever]
[Data Input Dial]
[Enter Button]
83