FUTABA 12Z Series Instruction Manual page 113

THR HOLD
This function sets the throttle cut position for
auto rotation. The throttle position can also be
set to an idling position separate from the throttle
cut position. Setting of these 2 positions can be
selected by switch. This allows use for switching
during training.
setup screen shown below by pushing the enter
button.
[Return Key]
stop position.
position.
Setting method
Manual mode(MANL): The throttle hold function is
operated by switch operation only.
Auto mode(AUTO): The throttle hold function
operation is linked to the throttle stick position.
Auto position setting:
be selected. Move the throttle stick to the position
Throttle Hold (Cut) sets the throttle cut position.
Throttle Hold (Idle):
by hold function selector switch.
Example of use
convenient.
hold condition.
(Currently selected condition name)
Operation precautions
WARNING
the idle up condition and throttle hold
<Functions of Model Menu (Helicopter Functions)>
[Cursor Lever]
[Data Input Dial]
PUSH
[Enter Button]
used.
113