Moving A Segment Backward Or Forward - ELNA XPRESSIVE 2 User Manual

130
Moving a segment
backward or forward
Use the Move Earlier by 1 command to move
the selected segment closer to the beginning
of the design. In other words, you are moving
the selected segment in front of the next
segment.
Use the Move Later by 1 command to move
the selected segment closer to the end of the
design. In other words, you are moving the
selected segment behind the next segment.
Move Earlier by 1 is used to move the blue
circle from fourth in the sequence to third in
the sequence.
To move a segment backward:
1 Select the segment.
2 Choose Edit—Resequence—Move Earlier
by 1.
Move Later by 1 is used to move the blue
circle from second in the sequence to third
in the sequence.
To view the sequence change, select
View—Sequence View.
To move a segment forward:
1 Select the segment.
2 Choose Edit— Resequence—Move Later
by 1.
Moving a Segment Backwards
and Forwards in Sequence View
Xpressive allows you to move segments
backwards and forwards in a design using
Sequence View. In Sequence View,
consecutive segments of the same color are
grouped together in layers. If a segment
contains more than one color, the segment
will be shown in a color group called "Multiple
Colors" in the Sequence View dialog.
To select multiple segments in Sequence
View, press Shift or Ctrl on your keyboard
while clicking on individual segments or
grouped segments. The Shift key selects
multiple segments shown consecutively.
The Ctrl key selects multiple segments
shown non-consecutively.
To move a segment backwards and
forwards using sequence view:
1 Choose View—Sequence View.
You will see the Sequence View dialog
appear.