Changing Carved Fill Properties; Choosing A Carved Tile Pattern; Creating Carved Fills - ELNA XPRESSIVE 2 User Manual

Changing Carved Fill
properties
Choosing a Carved Tile
pattern
When you install Xpressive, Carved Tile
patterns are installed on your computer. You
can select a Carved Tile pattern from the
Carved Tile Pattern property page. Carved
Tile patterns create a grooved or chiseled
effect for the designs that you create.
To choose a Carved Tile pattern:
1 Select the Carved Tile segment.
2 Click the Segment Settings
the ribbon.
You see the Segment Settings property
pages.
3 Click the Satin or Complex Fills property
page.
4 In the Carved Tile Pattern list, select a
pattern.
5 Click OK.
You will see your carved tile segment
altered accordingly.

Creating Carved Fills

To create a Carved Fill, you need to create a
segment with the Complex Fill
variety of patterns are installed with
Xpressive and you can also create custom
Carved Fill patterns. Carved Fill segments
are often used as background Fills.
To create Carved Fills:
1 In the Punching toolbar, click the Complex
Fill
2 Click the Segment Settings
the ribbon.
You see the Segment Settings property
pages.
3 Click the Satin or Complex Fills property
page.
4 In the Fill Pattern Type list, select Carved
Tile.
5 In the Carved Tile Pattern list, select a
Carved Tile pattern.
In this case, we have chosen pattern 212.
6 Click OK.
tool on
7 Punch the segment in the design
workspace.
8 Click the Auto Close
ribbon or press
close the segment.
9 Press ENTER on your keyboard.
Your cursor turns into a green arrow. You
now need to set the entry and exit points
and the angle line.
tool. A
ELNA XPRESSIVE II
User's Guide
tool.
tool on the
H
on your keyboard to
89
tool on