Creating Manual And Jump Stitches - ELNA XPRESSIVE 2 User Manual

To create Bean stitches:
1 In the Punching toolbar, click the Run
tool.
The pointer becomes a cross hair.
2 Click the Segment Settings
the ribbon.
You see the Segment Settings dialog
appear.
3 Click the Run property page.
4 In the Run Style list, select Bean.
5 Click OK.
6 Do one of the following to punch a
segment:
To create an open segment, click the
design workspace to place the anchor
points in your design.
To create a closed segment, click the
design workspace to place the anchor
point in your design. Click the Auto
Close tool on the ribbon or press
H on your keyboard to close the
segment.
7 To complete the segment, press ENTER
on your keyboard.
Creating Manual and
Jump stitches
Use the Manual tool to create manual
stitches. A Manual stitch is similar to a Run
stitch except that for every two points placed,
one stitch is formed. When you use the
Manual tool, a manual stitch is dropped at the
anchor points. You can also use the Manual
tool to place jump stitches, which is useful for
boring and sequin designs. A Jump stitch is
the movement of the pantograph without
needle penetration, commonly used to get
from one point in a design to another.
To create Manual stitches:
1 In the Punching toolbar, click the Manual
tool on
tool.
The pointer becomes a cross.
To change the properties of your
segment, the Segment Settings
on the ribbon or double-click the
segment. You see the Segment Settings
property pages. Click the appropriate
property page and make the setting
changes.
2 To create an open segment, complete the
following:
Click the design workspace to place
the anchor points in your design
(manual stitches).
Press Ctrl on your keyboard while
clicking the mouse to place Jump
stitches in your design.
3 To create a closed segment, complete the
following:
Click the design workspace to place
the anchor points in your design
(manual stitches).
Press Ctrl on your keyboard while
clicking the mouse to place Jump
stitches in your design.
Click the Auto Close
ribbon or press H on your keyboard to
close the segment.
4 To complete the manual segment, press
ENTER on your keyboard.
ELNA XPRESSIVE II 159
User's Guide
tool
tool on the