ELNA XPRESSIVE 2 User Manual page 218

216
Select tool
Sewability
Short Stitch
SmartMedia cards
SPM
SPI
The Select tool, located in the Edit toolbar and in the Edit menu,
allows you to work in Outline Mode. This tool allows you to select
and modify individual or groups of outline segments. You can select
outline segments by clicking on a single segment or by clicking and
dragging to draw a box around parts of the design. Once you select
outline segments, you can edit the segments and add commands by
using the shortcut menu options. To display the shortcut menu, press
Ctrl+E on your keyboard while using the Select tool.
The determination of whether a thread, fabric, backing, etc. can
perform under normal embroidery stitching.
A digitizing technique where in you place short stitches within the
outside perimeter of a curve or 45' angle to balance outside and
inside density in a satin stitch, to avoid unnecessary bulky build-up
of stitches.
The SmartMedia card is similar to the CompactFlash storage card
commonly used by digital cameras. You take a picture with a digital
camera and the photos are saved to the CompactFlash cards. You
create a design with Xpressive and the designs are saved to the
SmartMedia card. From the computer, you save the designs to the
card and then you insert the card into the appropriate embroidery
machine.
There are several input and output devices that are used to access
this type of card on the computer. The most common devices are the
devices that are inserted into the floppy disk drive. In these devices,
you can insert the SmartMedia card and then insert the card into the
computerís floppy drive. If you have the appropriate driver, the
computer can then access the card just like a regular floppy drive.
Stitches per minute. System used to measure the running speed of
an embroidery machine.
Stitches per inch. The imperial measurement for density of stitches.