Resizing Segments - ELNA XPRESSIVE 2 User Manual

122
To make a copy of your reflection
manually:
1 Select the segment you want to reflect.
For more information, see "Selecting
Segments".
2 Press Ctrl+E on your keyboard and select
Reflect from the shortcut menu.
You see the Reflect Group dialog appear.
3 Select Copy Reflection to make a copy of
the original segment you are reflecting.
4 Click OK.
5 Position the pointer on one point along
the invisible axis across which you want
the copy of your reflection to occur.
6 Click and drag to set the point of origin.
When you release your mouse, you see
the segment altered accordingly.
To make a copy of your reflection by
using the preset options:
1 Select the segment you want to reflect.
For more information, see "Selecting
Segments".
2 Press Ctrl+E on your keyboard and select
Reflect from the shortcut menu.
You see the Reflect Group dialog box.
3 Select the reflection option you want.
4 Select Copy Reflection to make a copy of
the original segment you are reflecting.
You can also reverse the order of
segments when you copy a reflection. If
you want to reverse the order of
segments, select Reverse Segment
Order.
5 Click OK.
You see the segment altered accordingly.

Resizing segments

Resizing a segment enlarges or reduces it
horizontally or vertically, relative to the
percentage you designate. You can manually
resize segments or use any of the other
resizing methods available for finer control.
Resized segment
To resize a segment manually using
design handles:
1 In the Edit toolbar, click the Select
tool or the Lasso Select
2 Select one or more segments.
For more information, see "Selecting
Segments".
The active segment is enclosed in a
selection box with handles.
3 To resize the segment proportionally, click
and drag the resize handles located on
each side of the selection box.
tool.